Kalinga Extrusion Technik - An Initiative to Promote Recycling.
One of the Other mostly used Blown Film Machine segment is Two / ABA Layer Film Machine. We designed both Mechanism as per our Client requirement. In recent years we have found that ABA Layer Blown Film has got Immense demand in Sector of Blown Film Machine. ABA has become the Vast used Blown film Machine as the Machine is Designed only with Two Extruders; However, the Finished film is Three Layer Film. Industry like Dairy Packaging Film, Shrink Film, Linear Bags, Garbage Bags etc.
Now there are different application where in the Film is Produced in different Colors on Inner and Outer Layer, the most commonly used Two Layer Machine is Mulch Film. Mulch Film is Agriculture used Film Which has Composition of UV Protection One Side of the Film. The other Important Mechanism in the Segment of Two Layer Blown film could be LD Tarpaulin made from 100% Recycling Granules and as well Shrink Films.
MODEL | Unit | CANITE – ABA | CANITE - TWO |
---|---|---|---|
Screw Diameter | MM | 45 + 55 | 55 + 65 |
Ratio | 30:1 | Groove/Smooth | Groove/Smooth |
Nip Roll | MM | 1100 | 1300 |
Actual Film Width | MM | 1000 | 1200 |
Film Thickness | Micron | 10 TO 75 | 15 TO 75 |
Die Size | MM | 200 | 250 |
Applications Processed | Granules | LL/LD/HM | LL/LD/HM |
Production Capacity | KG | 80 - 120 | 80 - 150 |
Power Load | KW | 48 | 65 |
Main Motor | HP | 7.5 + 10 | 15 + 20 |
Dimension | FEET | 30 L x 15 W x 26H | 30 L x 15 W x 28H |
MODEL | Unit | CANITE – ABA TARPAULIN 6 FEET | CANITE – TWO MULCH FILM |
---|---|---|---|
Screw Diameter | MM | 65 + 75 | 45 + 55 |
Ratio | 30:1 | Groove/Smooth | Groove/Smooth |
Nip Roll | MM | 2000 | 1320 |
Actual Film Width | MM | 1850 | 1220 |
Film Thickness | Micron | 20 TO 150 | 20 TO 75 |
Die Size | MM | 600 | 300 |
Applications Processed | Granules | LL/LD | LL/LD |
Power Load | KW | 90 | 80 |
Main Motor | HP | 20 + 25 | 15 + 20 |
Dimension | FEET | 45 L x 30 W x 30H | 40 L x 20 W x 28H |
NOTE : The above given details is for guidelines & manufacturer doesn’t commits to the specifications.
Customers. Suppliers. Plastics.